Discussion in 'International Area' started by Radek, Jul 14, 2014.

  1. Radek

    Radek New Member

    Hello! Is the Equilibrium 3.5 supported in LogView?
    Radek, Jul 14, 2014
    #1
  2. Dominik

    Dominik Administrator Staff Member

    hi !

    You can try a Bantam eStation BC6. If that does not work you can try to record some data. So I can take a look :)
    Dominik, Jul 14, 2014
    #2
  3. Radek

    Radek New Member

    Hi! Thank you for the quick response. Any data coming in, but I see no Live data, no curves :(
    There is sample of serial logging:

    22:38:51,602 [H] 8284808CA780808180808081808088828080808080808080808080808080808080807D
    22:38:52,487 [H] 7B
    22:38:52,520 [H] 8284808CA68080818080808180808882808080808080808080808080808080
    22:38:52,598 [H] 8080807D
    22:38:53,491 [H] 7B
    22:38:53,603 [H] 8284808CA780808180808081808088828080808080808080808080808080808080807D
    22:38:54,488 [H] 7B
    22:38:54,599 [H] 8284808CA680808180808081808088828080808080808080808080808080808080807D
    22:38:55,492 [H] 7B
    22:38:55,603 [H] 8284808CA780808180808081808088828080808080808080808080808080808080807D
    22:38:56,488 [H] 7B
    22:38:56,599 [H] 8284808CA680808180808081808088828080808080808080808080808080808080807D
    22:38:57,487 [H] 7B
    22:38:57,598 [H] 8284808CA680808180808081808088828080808080808080808080808080808080807D
    22:38:58,490 [H] 7B
    22:38:58,526 [H] 8284808CA78080818080808180808882808080808080808080808080808080808080
    22:38:58,601 [H] 7D
    22:38:59,487 [H] 7B
    22:38:59,523 [H] 8284808CA78080818080808180808882808080808080808080808080808080808080
    22:38:59,599 [H] 7D
    Radek, Jul 14, 2014
    #3
  4. Dominik

    Dominik Administrator Staff Member

    Hi !

    Well this protocol looks like a Bantam protocol - but in fact it isn´t one ...

    The protocol length is only 37 Byte which is really unausual. At the moment LogView would not support your device.
    I think the best advice is to contact the vendor Equilibrium. Since they have an own "simple" application they should know the protocol.
    Ask them if they can share the protocol information with us. After that I can implement that charger into LogView Studio.

    If you send them an email just place me as CC : dominik AT logview DOT info
    Dominik, Jul 17, 2014
    #4
  5. Radek

    Radek New Member

    Hi!

    Seller does not respond. It doesn't matter. I made it myself ;)

    Attached Files:

    Radek, Jul 22, 2014
    #5
  6. Dominik

    Dominik Administrator Staff Member

    Hi !

    What is the flag for discharging?
    Dominik, Jul 24, 2014
    #6
  7. Radek

    Radek New Member

    Hi!

    01
    Radek, Jul 24, 2014
    #7
  8. Oceanflyer

    Oceanflyer New Member

    Hi Radek,
    for me it looks very similar to the Hype X7. Then you might find also the Battery Type on Byte 3 according following scheme: // Accutype 0 = SETUP ( REVIEW) / 1 = LiPo / 2 = LiFe / 3 = LiIon / 4 = NiMH / 5 = NiCD / 6 = PB
    Oceanflyer, Jul 25, 2014
    #8
  9. Radek

    Radek New Member

    Hi Oceanflyer,

    thanks for noticing. Indeed, Byte 3 is Accutype (mode): 1 = LiPo / 2 = LiFe / 3 = LiIon / 4 = NiMH / 5 = NiCD / 6 = PB / 7 = Digital Power (charger like a stabilized power suplier) / 8 = User set (set up menu where you can customize all the charger's parameters).
    Radek, Jul 25, 2014
    #9
  10. Dominik

    Dominik Administrator Staff Member

    Before we start implementing ... Are there any Bytes left which could hold useful Information?
    Dominik, Jul 25, 2014
    #10
  11. Radek

    Radek New Member

    I see no more useful Byte for this charger.
    Radek, Jul 25, 2014
    #11
  12. Oceanflyer

    Oceanflyer New Member

    Hi Radek, well done, thanks that my expectation was correct ... ;)
    Oceanflyer, Jul 26, 2014
    #12
  13. Radek

    Radek New Member

    Hi Dominik,

    charger Equilibrium 3.5 is not supported in the current version of LogView Studio. It will be supported in the near future?
    Radek, Sep 16, 2014
    #13

Share This Page